BLOG
News and Info about AutoTwirler
Off Road Wheel Kit
If you want to push or pull your rotisserie out into the grass, gravel, dirt, or just up and down off dovetail trailers, we recommend our Off Road Wheel Kit. This kit fits our rotisseries.
You get four (4) metal brackets and four (4) 10" diameter solid rubber casters, 2 swivel and 2 rigid, all rated at 550 lbs per caster. We include 2 swivels and 2 rigids so that you push and steer at the same time. We changed to solid rubber wheels a few years ago because the hub on the pneumatics would fail under load, especially when they were under inflated. The brackets are welded at an offset angle to lock tight under load. No hardware necessary.
These solid rubber swivel casters are much faster at rotating to the direction of travel.
With wheel kit installed weight limit is 1650 lbs.
Mustang Brackets
Mustangs can be mounted in the front with our standard 16" mounting arms if you want to drill a second hole in it to match up with the bumper bracket location, or you can get it pre-drilled in the kit.
In the rear, you can mount at the leaf spring perch, or the rear bumper mount. You can order each individual piece separately, or you can get the Mustang Kit with our leaf spring brackets and the bolt kit to match up to your body. Good for 1964 1/2 – 1973 and most Ford Unibodies.
Mounting Arms
Each of our Auto Twirler rotisseries come with 4 mounting arms. Occasionally customers want additional arms that they can modify for mounting to their body. Each mounting arm has two holes in the end so you can bolt directly into body mounts on full frame car bodies. They also all have 2” square tubing protruding out from the collar so that all of our brackets will mount on them. These arms fit the Pro, Elite and Classic Rotisseries with 3" swing arms.
