AutoTwirler Classic

The AutoTwirler CLASSIC is our original fixed height rotisserie model. The pivot point is welded to the top of the upright post. You’ll need to use an external lifting device to lift your car body or frame about 3.0 to 3.5 feet off the ground to bolt the rotisserie to it.

Like our other units, the base is fully welded together for strength and long term durability.

You can balance the car in the same fashion as our ELITE model. That is assuming you have a lifting device to raise the car up to mount it.

Pivot Point

welded to the top of the uprightpost.


You can balance the car in the same fashion as our ELITE model. That is assuming you have a lifting device to raise the car up to mount it.






You can balance the car in the same fashion as our ELITE model. That is assuming you have a lifting device to raise the car up to mount it.






Weight 400 lbs
Dimensions 63 x 54 in
Material

3,000 lbs. capacity. Fixed height model made of 3” square tubing. The horizontal member of the swing arm is 3/16” thick.

Mounting Arm Height

36″ – 48” High Mounting arm Height.

Mounting Arms

4 – 16″ Mounting Arms.

Center Bar

• 3 piece telescoping center bar allowing 19′ of extension.

Casters

Six (6) – 5″ Phenolic Casters rated at 500 lbs. each, includes 4 caster locks.

Storage

72″ x 30″ x 54″

Made in the USA

The AutoTwirler CLASSIC is manufactured in Utah and comes with our 1 year caster & jack and steel warranty. Unless otherwise noted, the AutoTwirler CLASSIC ships bare steel. Powder Coating is also available in red and blue.

Reviews

There are no reviews yet.

Be the first to review “AutoTwirler Classic”